These are prototypes for the new design Snack Break. Nothing at all wrong with them, they are perfectly good bags with maybe some aesthetic blemishes as I was going through a trial and error process to nail down dimensions, fabrics, design features etc. So get yourself a deal!
Bag description:
The Snack Break is our top tube bag. Fill it with snacks, take a break, and eat your snacks. It will fit pretty much any bike, and is designed to work with Watering Holes and a frame bag. The Velcro strap on the bottom of the Snack Break is fixed for stability, and along the front you have a few positions to choose from to work with your stem height. With a little bit of cursing you can use one piece of Velcro to secure the Snack Break and two Watering Holes. An 8" piece of 3/4" Velcro OneWrap is included for mounting around the stem spacers.
The new design is a bit longer and taller than the old Snack Break, but the main difference is a higher taper along the zipper to make the bag taller near the back. This provides a lot more volume and will accomodate most smartphones. There is also a cable port so you can have a battery pack in the bag and the cable going out to your light.
Specs:
8.5" long, 4.5" tall, with a high taper along zipper to accomodate most smartphones.
Exterior fabric is either 1000D Cordura, X-Pac VX21, or Ecopak EPX200.
Bottom and front fabric is black 1000D Cordura.
3/4" Velcro OneWrap for mounting arond stem spacers.
Bottom and sides padded with 1/8" closed cell foam.
Bolt-on model has thin plastic sheet along bottom.
If ordering bolt-on, please provide measurment, in millimetres, from headset to first bolt (should be either 76mm or 100mm)
